Our Promoter - Mr. Bipin K Patel

A prestigious name in the domain of advanced pharma intermediates, All Chem Laboratories is promoted by Mr. Bipin K Patel. He has completed M.Sc. in organic chemistry, from M.S. University, Baroda, Gujarat in 1994. Over the past 14 years, he has acquired experience in following areas:

• Research and development
• Analytical work (QC department)
• Scale up work (Lab > pilot plant > Commercial production)
• Knowledge of different types of technologies
• Handling of different kinds of chemicals
• Utilities equipment (for production plant)
• Electrical knowledge
• Licensing work related to factory act
• Marketing work and chemicals sourcing knowledge
  

He also has experience in various drug intermediates, pharama intermediate and organic derivatives such as:

• Domperidone
• Cetrizine
• Astemazole
• Nimesulide
• Buflomedil
• Quatipine
• Ebastine
• Carvedilol
• Meloxicam
• Fentanyl
• Cefuroxime
• Cefazolin
• Ceftrixone
• Piperazine Derivatives (aryl And Aliphatic)
• Piperidone And Piperidine Derivatives
• Cyanide Derivatives (benzyl Cyanide, Aromatic And Aliphatic)
• Cycloalkane Derivaties
• Aldehyde And Ketone Derivatives
• Carboxylic Acid And Derivatives
• Amine Derivatives (aryl, Aliphatic And Bezylic )
• Hetrocyclic Derivaties (pyrimidine, Imidazole, Benzimidazole, Benzothiozole, etc.)
• Custom Synthesis And Contract Research Type Of Products Ranging From 20 Gm To 50 Kg Level.

Quality Control

Quality control laboratory is fully equipped with all modern instruments which can give very accurate results.  Allchem Laboratory always trying to give the product that meets national and international standards.

Allchem laboratories manufactures its products which confirms specifications depending on the requirement of its customers and is fully equipped to analyses its products as per the international standards and specifications.

Allchem Laboratories’ staff is well experienced chemists in various fields to perform all type of analysis like

• Reaction monitoring i.e. in process analysis
• Analysis of raw materials, semi-finished products as well as finished products
• Physico-chemical properties.
  

Allchem Laboratories quality control laboratory is equipped with:

Gas chromatograph analysis with capillary column
Model: Shimadzu 14B,  GC-2010
Capillary column : Ultra-2, DB-5, DB-1 and DB-624 etc…
HPLC analysis with different column
Model: Shimadzu LC 2010
Titration facilities
Perchloric titration (non-aqueous)
Acid-Base titration
Halide titration
Melting point-Boiling point testing
Thin layer chromatography
IR, GC-MS, NMR support for analysis.

Quality Policy

We at Allchem Laboratories are committed for development, optimization and manufacturing of organic fine chemicals and pharmaceuticals intermediates in order to meet the changing needs of customers from time to time.

We are committed to:

- Satisfy our customers’ needs and expectations.
- Focusing on innovation through continually new improvement in Research & Development.
- Make commitments we fully understand and believe we can meet on time.
- Enhancement of Quality, Safety and Efficacy/Efficiency of our products.

Performance Driven

- Verify that our products meet agreed requirements.
- Monitor and continually improve our business, products and services, organization and employees' performance by sensing customers’ needs. (Internal/ external).

And committed for effective implementation of QMS.

Infrastructural Setup

Located at 400 km north of Mumbai, Vadodara (Gujarat, India), our infrastructural set up spreads over 10000 sq. meter of area. Its has multipurpose plant, quality control facility, R&D wing, Kilo lab, pilot plant, commercial plant and effluent treatment plant. The plant design conforms to GMP standards. At effluent treatment plant, primary treatment is done whereas secondary treatments are carried out in a common effluent treatment plant. The plant is credited with NECL (Nandesari Environment control Ltd) membership certificate for solid waste and EICL (Enviro Infrastructure Co. Ltd) membership certificate for waste water.

Kilo Lab and Pilot Plant

The pilot plant has glass assembly reactor & stainless steel reactors in the range of 2 liters to 500 liters. The plant provides support to all phases of formulation activities and assists in scaling-up the work to meet the technology requirements. Its specifics are as follows:

• Plant area : 2250 sq. ft
• Operating volume : 2500 liters
• Operating temperature : -70 deg C to 250 deg C
• Operating pressure : 25 kg/cm2
• Operating vacuum : 0.05 mm of Hg
• Fractionating column for high vacuum distillation using reflux ratio.
  

The Pilot plant is installed with following equipment:

• Stainless steel autoclave (2 lit & 50 lit)
• Reaction cum distillation glass assembly (50 lit, 20 lit)
• Reaction cum distillation stainless steel reactor (200 lit, 50 lit)
• High vacuum pumps
• High vacuum distillation unit (20 lit & 50 lit)
• Vacuum ejectors
  

Commercial Production Plant Facilities

• Glass assembly reactor & SS reactors
• Plant area : 15000 sq. ft
• Operating volume : 25700 liters
• Operating temperature : -10 deg C to 200 deg C
• Operating pressure: : 15 kg/cm2
• Operating vacuum : 0.05 mm of Hg
• Scrubber, Dryer
• Steam and oil heating system
• Cooling, chilled water and brine circulation
• RO and DM water plant
• Vacuum through ejectors and high vacuum oil ring pumps.
  

This plant is installed with following facilities:

• Glass lined reactors (500 liters, 1000 liters, 2000 liters)
• SS reactors (2000 liters, 3000 liters)
• Autoclave pressure 15 kg/cm2 (600 liters, 2000 liters)
• High vacuum distillation unit (800 liters, 2000 liters)
• HDPE & PP tanks
• Centrifuges, dryer (trays, vacuum, fluid bed dryer), ejectors, vacuum pumps, air compressor, boiler, thermic fluid heaters, cooling towers, chilling plant, scrubbers etc.
  

Technologies we can handle

Being a one stop shop for all types of organic chemicals and pharmaceutical formulations, we have developed the expertise of handling various technologies. These technologies are as below:

• 1,4-addition
• Dimethyl Sulphate Reaction
• Liquid Ammonia Reaction
• Acetylation
• Esterification
• Low Temperature Reaction (-70 Deg C) Using Dry Ice
• Acid Chloride Reaction, Amide Formation
• Favorskii Rearrangement
• Mannich Reaction
• Acylation (fridel Craft Reaction)
• Fries Rearrangement
• Phase Transfer Reaction
• Alkylation’s Of -C, -N, -S, -O Etc.
• Gabriel Synthesis
• Reductive Aminationarylation Of Piperazines
• Bromination (Side Chain As Well As Aromatic Ring)
• Grignard Reaction
• Ring Closer Reaction
• Chlorination (Side Chain As Well As Aromatic Ring)
• High Vacuum Distillation (Up To 0.005 Mm Of Hg)
• Sandmayer Reaction
• Chloromethylation
• Hydrogenation(With Ni, 5% Pd And 5% Rh On C)
• Stork Enamine Reaction
• Cyanation (side Chain As Well As Ring)
• Hydrolysis Of Esters, Amides And Nitriles
• Substitution
• Cyclization
• Iodination (Side Chain As Well As Aromatic Ring)
• Vilsmeier-Haack Reaction
• Decaboxylation
• Jones Oxidation
• Williamson Synthesis
• Dieckmann Cyclization
• Koevenagel Condensation
  

Research & Development

All Chem Laboratories is a professional company, engaged in developing the best quality organic fine chemical and allied products. All products are in compliance with international standards and are processed as per the latest market developments. Also, we are engaged in developing new methods that would not only improve the quality of products, but also allow us to update our facility into an environment friendly one, having simplified process and complete safety. Research and development activities are targeted to achieve following:

• Improving product quality
• Enhancing environment friendliness
• Seamless and simplified development process
• Develop technologies for new products
• Establish processes in laboratory for products to be scale up.
  

For sustaining a strong hold over the products, we have equipped laboratories with the innovative lab wares. Also, we have carried out studies related to “all reaction careful scale-up and industrial implementation”. This allows us to apply these at the industrial level.

Strengths of Our Company

Owing to sophisticated production facilities and well managed research unit, we are offering an innovative range of Commercial Products, Advanced Pharma Intermediates, Campaign Products, Fine Chemicals and other organic chemicals. Quality of these products is one of the main reasons for our success at the international level. Some of the other reasons are as follows:

• High level of confidence in handling new projects & chemistry
• Effective and productive process development, scale-up and quality control
• Highly efficient inventory control, which reduces delivery time
• Raw material procurement from reputed sources
• Systematic and proper use of raw material for custom synthesis projects
• Large scale product supply from gram to ton scale
• Products offered in gm/kilo quantities
• Seasoned and experienced production team.

Effluent treatment plant

• Primary treatment done at ETP and secondary treatments are done in common effluent treatment plant
• NECL (Nandesari Environment control Ltd) membership certificate for solid waste
• EICL (Enviro Infrastructure Co. Ltd) membership certificate for waste water.